VRX (r.p.m. 3400 - Ø 3/4'' SAE J 609 A)

Axial Pumps

 

PATENTED POWER TAKEOFF SHAFT MADE IN STEEL with built-in key, having a mechanical strength that is much higher than the solutions made in aluminium that are normally present on the market for the pumps of this category.
SUPPORT for the installation on patented motors.
INNER KINEMATIC MOTION WITH BALL BEARINGS
PISTONS MADE IN SPECIAL STAINLESS STEEL.
DELIVERY CONNECTOR M22x1.5 with inner hole ø15 mm or ø14 mm.
HEAD MADE IN A SPECIAL ALUMINIUM alloy with high resistance to corrosion (VRX 2017V).
HEAD MADE IN BRASS (for all the other models). The whole pumping part is obtained in the head, a solution that until today had been only used for professional pumps.
CONNECTOR FOR GARDEN HOSE (upon request).
THERMAL PROTECTION VALVE (upon request).
SUCTION/DELIVERY VALVES with high volume yield and stainless steel seat (pressures higher than 150 bars) and washer made in stainless steel.
Standard CLEANER SUCTION.
CASE MADE IN ALUMINIUM ALLOY free maintenance pump: no oil change needed.
ADJUSTING UNLOADER EQUIPPED with check valve that guarantees reliability in time and insensitiveness to nozzle wear (lance nozzle and ejector nozzle). Pressure zero setting when closing the lance.
SUCTION CONNECTOR 1/2" - 14 BSP - F (Head in Brass) 3/4" - 14 BSP - M (Head in Aluminium), with filter; connector for Garden Hose upon request.

 

Download data sheet

Code Type RPM Flow rate Pressure Power Weight
l/min US
GPM
bar psi MPa hp kW kg lb

 

Female suction coupling G 1/2 with filter
All models are with Built-in pressure regulator.
Delivery coupling M 22 x 1,5


Head material legend
Brass

 

NOTES

The specifications, dimensional drawings and pictures are indicative only and not binding , COMET reserves the right to make changes without prior notice.

6511 0005 VRX 2522 G 3400 9,5 2,5 152 2200 15,2 4,2 3,1 3,3 7,3
6511 0015 VRX 2524 G 3400 9,5 2,5 165 2400 16,5 4,4 3,3 3,5 7,7
6511 0020 VRX 2525 G TR 3400 8.3 2,2 172 2500 17.2     3.6 8.0
6511 0025 VRX 2527 G 3400 9,5 2,5 186 2700 18,6 5,1 3,8 3,5 7,7
6511 0033 VRX 2527 G7 3400 9,5 2,5 186 2700 18,6     3,9 8.8

VRX (r.p.m. 3400 - Ø 3/4'' SAE J 609 A)