VRX (r.p.m. 3200 - Ø 7/8'' SAE J 609 A)

Axial Pumps

 

PATENTED POWER TAKEOFF SHAFT MADE IN STEEL with built-in key, having a mechanical strength that is much higher than the solutions made in aluminium that are normally present on the market for the pumps of this category.
SUPPORT for the installation on patented motors.
INNER KINEMATIC MOTION WITH BALL BEARINGS
PISTONS MADE IN SPECIAL STAINLESS STEEL.
DELIVERY CONNECTOR M22x1.5 with inner hole ø15 mm or ø14 mm.
HEAD MADE IN A SPECIAL ALUMINIUM alloy with high resistance to corrosion (VRX 2017V).
HEAD MADE IN BRASS (for all the other models). The whole pumping part is obtained in the head, a solution that until today had been only used for professional pumps.
CONNECTOR FOR GARDEN HOSE (upon request).
THERMAL PROTECTION VALVE (upon request).
SUCTION/DELIVERY VALVES with high volume yield and stainless steel seat (pressures higher than 150 bars) and washer made in stainless steel.
Standard CLEANER SUCTION.
CASE MADE IN ALUMINIUM ALLOY free maintenance pump: no oil change needed.
ADJUSTING UNLOADER EQUIPPED with check valve that guarantees reliability in time and insensitiveness to nozzle wear (lance nozzle and ejector nozzle). Pressure zero setting when closing the lance.
SUCTION CONNECTOR 1/2" - 14 BSP - F (Head in Brass) 3/4" - 14 BSP - M (Head in Aluminium), with filter; connector for Garden Hose upon request.

 

Download data sheet

Code Type RPM Flow rate Pressure Power Weight
l/min US GPM bar psi MPa hp kW kg lb.

 

Female suction coupling G 1/2 with filter
All models are with Built-in pressure regulator.
Delivery coupling M 22 x 1,5
CODE: 6511 0003 - 7/8" Shaft - Length 80
CODE: 6511 0004 - 7/8" Shaft - Length 46

 

Head material legend
Brass
6511 0004 VRX 2022 V 3200 8,0 2,1 152 2200 15,2 3,5 2,6 3,5 7,7

VRX (r.p.m. 3200 - Ø 7/8'' SAE J 609 A) Diagram