RW 85°-185°F (r.p.m. 1400 Ø 24 mm SOL. S.)

Special Use Pumps

 

LARGE OIL CAPACITY dissipates heat and improves lubrication for longer life
CRANKCASE: DIE CAST ALUMINIUM ALLOY is anodized for protection against corrosion
High strength forged BRASS HEAD
CHECK VALVES in stainless steel with a highly efficient design
LARGE WORKING SURFACE of brass rings on crankcase
CERAMIC SOLID PLUNGERS
EXCLUSIVE COUPLING SYSTEM BETWEEN PUMP HEAD AND CRANKCASE it prevents dust and dirt from penetrating the area where pistons work, but allows water to exit (PATENT PENDING)
EXCLUSIVE PACKING SYSTEM. New self lubricating double packing design with special buna texile seals and bronze rings for an exceptional packing life
OIL VENTED DIPSTICK
CRANKCASE COMPLETELY SURROUNDED by large fins for an efficient oil cooling for drastic reduction of operating temperature
TWO oil sight GLASSES
O-RING SEALING SYSTEM between crankcase and back cover
CONNECTING RODS are in one piece bronze alloy
BEARINGS are oversized, premium quality tapered roller bearings
Solid shaft 24mm for electric motor or gearbox application
GUIDE PISTONS are in heat treated stainless steel
EXCLUSIVE CRANKCASE OIL SEALING SYSTEM it minimizes the wearing on pistons oil seals (PATENTED)

Download data sheet

Code Type RPM Flow rate Pressure Power Weight
l/min US
GPM
bar psi MPa hp kW kg lb

 

On request available hoter models.
All models are right hand p.to (left hand p.to on request).
Option: complete base kit code 5011 0214

 

Head material legend
Brass

 

NOTES

The specifications, dimensional drawings and pictures are indicative only and not binding , COMET reserves the right to make changes without prior notice.

6517 0102 RW 4030 S 1450 15,6 4,1 207 3000 20,7 8,1 5,9 11,2 24,6
6517 0803 RW 5530 S 1450 22,8 5,1 207 3000 20,7 10,8 7,9 11,2 24,6
6517 0902 RW 6030 S 1450 23,4 6,2 207 3000 20,7 12,1 8,9 11,2 24,6
6517 1301 RW 5535 S 1450 20,8 5,3 241 3500 24,1 12,6 9,3 11,2 24,6

5011 0230
APPLICATION KIT FOR HYDRAULIC MOTOR
HYDRAULIC MOTOR TYPE: 2S - shaft M 12 x 1,5
5011 0256
APPLICATION KIT FOR HYDRAULIC MOTOR
HYDRAULIC MOTOR TYPE: 2S - shaft 5/8"